Disk wiping

• To wipe an HDD by writing zeros to it:

# ddrescue -f /dev/zero /dev/addX

The average speed is above 100 MB/s, so 1 TB takes about 2-3 hours.

• To wipe an Intel/Solidigm Data Center SSD by the Solidigm Storage Tool:

1. Delete all partitions
2. # sst delete --ssd <index>

The <index> can be found by using the command

# sst show --ssd

• To wipe a SSD by the ATA Security Erase command:

1. Make sure the drive is not frozen and support "enhanced erase":

   # camcontrol security adaX

   ...

   Security Option Value

   supported yes

   enabled no

   drive locked no

   security config frozen no

   count expired no

   security level high

   enhanced erase supported yes

   erase time 4 min

   enhanced erase time 4 min

   ...

2. Set a user password (this password will be cleared on the next step, so the exact choice does not matter):

   # hdparm --user-master u --security-set-pass foo /dev/sdX

3. Issue the ATA Secure Erase command:

   # hdparm --user-master u --security-erase foo /dev/sdX

4. Check that security is disabled:

   # hdparm -I /dev/sdX

   [...]

   Security:

   Master password revision code = 65534

   supported

   not enabled

   not locked

   not frozen

   not expired: security count

   supported: enhanced erase

   3min for SECURITY ERASE UNIT. 3min for ENHANCED SECURITY ERASE UNIT.

   [...]