After installing Slackware: a checklist

Should be done during installation:

• partitions
• Software series:
  • server:

min: a ap d l n

max: a ap d e f k l n t tcl x y (i.e., all except for kde xap xfce)

• desktop: server/max + xap (i.e., all except for kde xfce)

• Comment out

if has("vms")
  set nobackup          " do not keep a backup file, use versions instead
else
  set backup            " keep a backup file (restore to previous version)
  if has('persistent_undo')
    set undofile        " keep an undo file (undo changes after closing)
  endif
endif

in /usr/share/vim/vimrc and run

# rm /usr/share/vim/vimrc~ /usr/share/vim/.vimrc.un~

• Label partitions
• Remove kernel-huge and fix the symlinks in /boot
• Remove lilo
• /etc/ssh/sshd_config:

Port 26
AddressFamily inet
PermitRootLogin yes
PrintMotd no
PrintLastLog no

• /etc/fstab
• /etc/mdadm.conf
• /etc/mkinitrd.conf
• /boot/grub/grub.cfg
• /etc/hosts
• /etc/rc.d/rc.inet1.conf
• /etc/resolv.conf

After installation

• # chmod -x /etc/profile.d/bsd-games-login-fortune.sh
• Disable unneeded rc-files, e.g., # chmod -x rc.acpid rc.bluetooth rc.elogind rc.gpm-sample rc.haveged rc.wireless
• Install slackscan
• Install all patches with slup
• # slup bash-completion
• # cp /usr/doc/git-*/contrib/completion/git-completion.bash /etc/bash_completion.d/
• /root/.bash_completion

_mkcd()
{
    local cur prev words cword split
    _init_completion -s || return
    $split && return 0
    _filedir -d
}
complete -F _mkcd mkcd

• Upgrade kernel; /etc/rc.d/rc.modules.local, blacklist unneeded modules
• Upgrade the Intel microcode
• Install neovim, my-neovim-extras, and their dependencies

• Put init.vim and ru_renard.vim to /root/.config/nvim/
• mkdir -p ~/.local/share/nvim/backup/

• /etc/ssh/ssh_config

Host *
AddressFamily inet

• /etc/profile.d/lang.sh: comment out export LANG=en_US and add

LANG=ru_RU.UTF-8
LC_MESSAGES=en_US.UTF-8
LC_TIME=en_GB.UTF-8
LC_NUMERIC=en_US.UTF-8
LC_MONETARY=en_US.UTF-8
export LANG LC_MESSAGES LC_TIME LC_NUMERIC LC_MONETARY

Preserve "export LC_COLLATE=C"

• /etc/profile.d/man.sh

alias man='LANG=C /usr/bin/man'

• /root/.bash_profile

[[ -d /root/bin ]] && PATH="$PATH:/root/bin"

EDITOR=/usr/bin/vi
VISUAL=$EDITOR
PAGER="view -"
MANPAGER="/bin/bash -c \"col -b | LANG=C view -c 'set filetype=man' -\""

export PATH EDITOR VISUAL PAGER MANPAGER

shopt -s histappend
HISTSIZE=1000
HISTFILESIZE=2000
HISTCONTROL=ignoreboth:erasedups

shopt -s checkwinsize

# disable XON/XOFF flow control (C-s, C-q)
[[ $- = *i* ]] && stty -ixon

# set the xterm title and the prompt color (magenta)
[[ $TERM = xterm* ]] && \
  PS1="\[\e]2;\u@\h: \w\a$(tput setaf 5)\]${PS1}\[$(tput sgr0)\]"

# make the cursor a bar instead of a box
echo -e -n "\x1b[\x36 q"

[[ -f /root/.bash_aliases ]] && source /root/.bash_aliases
[[ -f /root/.bash_functions ]] && source /root/.bash_functions

• /root/.bashrc:

source /etc/profile
source /root/.bash_profile

• /root/.bash_functions

mkcd()
{
[[ $# -eq 1 ]] && mkdir -p "$1" && cd "$1" \
    || echo "mkcd expects exactly one argument"
}

• If the machine is not always on change the root crontab to

# root crontab
# DO NOT EDIT THIS FILE MANUALLY! USE crontab -e INSTEAD
#
# If you don't want the output of a cron job mailed to you, you have to direct
# any output to /dev/null.  We'll do this here since these jobs should run
# properly on a newly installed system.  If a script fails, run-parts will
# mail a notice to root.
#
# man 1 crontab for acceptable formats:
#    <minute> <hour> <day> <month> <dow> <tags and command>
#    <@freq> <tags and command>

# SYSTEM DAILY/WEEKLY/... FOLDERS
#
@hourly   ID=sys-hourly  /usr/bin/run-parts /etc/cron.hourly 1> /dev/null
@daily    ID=sys-daily   /usr/bin/run-parts /etc/cron.daily 1> /dev/null
@weekly   ID=sys-weekly  /usr/bin/run-parts /etc/cron.weekly 1> /dev/null
@monthly  ID=sys-monthly /usr/bin/run-parts /etc/cron.monthly 1> /dev/null

• # install -m 0644 -o root -g root /usr/doc/dcron-*/extra/prune-cronstamps /etc/cron.d/

• /etc/cron.daily/fstrim:

#!/bin/bash
/sbin/fstrim /

• # sensors-detect. Add modules for lm_sensors to /etc/rc.d/rc.modules.local
• /etc/rc.d/rc.local

# Set all sensors limits as specified in the configuration file
if [ -x /usr/bin/sensors ]; then
  /usr/bin/sensors -s
fi

• # slup ipmitool
• /etc/rc.d/rc.modules.local

# IPMI modules
/sbin/modprobe ipmi_msghandler
/sbin/modprobe ipmi_devintf
/sbin/modprobe ipmi_si

• /etc/smartd.conf. For HDD:

/dev/disk/by-id/ata-...  -a -o on -S on -I 9 -I 190 -I 194 -m root -s (S/../.././04)

For SSD, substitute "S" in parentheses with "L".

To start smartd uncomment the corresponding lines in /etc/rc.d/rc.M. If the machine is not always on, add the option --savestates=/var/tmp/smartd.

• Creat /etc/X11/xinit/xserverrc

#!/bin/bash
exec /usr/bin/X -dpi 94

• Creat /etc/sysctl.conf

1. Change tcp congestion control to bbr

net.core.default_qdisc=fq net.ipv4.tcp_congestion_control=bbr

1. Increase the maximum number of inotify watches per user

fs.inotify.max_user_watches=1048576

1. To disable mtp comment out the line

SUBSYSTEM=="usb", GOTO="libmtp_usb_rules"

in /lib/udev/rules.d/69-libmtp.rules

• Install wine

• # chmod -x /usr/bin/dbus-launch; chattr +i /usr/bin/dbus-launch

or

• # cp -a /usr/share/dbus-1 /root; rm -r /usr/share/dbus-1/*services; chattr +i /usr/share/dbus-1
• Create users (using adduser script)
• # usermod -a -G wheel user
• ~/.bash_profile:

# add user's private bin to PATH
[ -d "$HOME/bin" ] && PATH="$PATH:$HOME/bin"

EDITOR=/usr/bin/vi
VISUAL=$EDITOR

export PATH EDITOR VISUAL

# don't put duplicate lines or lines starting with space in the history.
HISTCONTROL=ignoreboth

# append to the history file, don't overwrite it
shopt -s histappend

# for setting history length
HISTSIZE=1000
HISTFILESIZE=2000

# check the window size after each command and, if necessary,
# update the values of LINES and COLUMNS.
shopt -s checkwinsize

PS1="\[\e]0;\w\a\]$PS1"  # set the xterm title to show the directory
echo -e -n "\x1b[\x36 q"  # make the cursor a bar instead of a box

# Aliases and functions.
for f in .bash_aliases .bash_functions; do
  [ -f "$HOME/$f" ] && source "$HOME/$f"
done

# Stop if not invoked by login
shopt -q login_shell || return

# start X
[[ -z "$DISPLAY" && $EUID -ge 1000 && $(tty) =~ ^/dev/tty[12]$ ]] && /usr/bin/startx

• .bash_logout

# Clear the screen.
# To clear the scroll-back buffer, we change the foreground virtual terminal
# to another terminal and then back to the original terminal

if [[ -z "$DISPLAY" && $SHLVL = 1 && $(tty) =~ ^/dev/tty[0-9]+$ ]]; then
  clear
  tty_num=$(echo $(tty) | grep -oE '[0-9]+$')
  if [ $tty_num = 1 ]; then
    chvt 2;
    chvt 1;
  else
    chvt 1
    chvt $tty_num
  fi
fi

• $ ssh-copy-id -i ~/.ssh/id_rsa.pub
• /etc/ssh/sshd_config

AddressFamily inet
PermitRootLogin no
PasswordAuthentication no
PrintMotd no
PrintLastLog no