2013 Workstation: Difference between revisions

Revision as of 09:11, 18 December 2013

To be built :-)

Motherboard

Supermicro MBD-X10SAE-O, Rev. 1.01, ATX, Intel C226, LGA 1150, Quick Reference Guide, Manual, BIOS 1.1 build 2013/8/13

Built-in: Intel HD graphics P4700; Dual Intel i217LM + i210AT Gigabit LAN; Secondary audio, Realtek ALC1150

Processor: Intel Xeon E3-1285v3 (Haswell), Quad Core (8 threads), 3.6 GHz, 8MB L3 Cache, LGA 1150, 84W, CM8064601466703, SR14W

Memory: 32GB (4 x 8GB) Kingston ValueRAM, DDR3-1600 ECC unbuffered 1.5V (KVR16E11/8), Elpida J4208EFBG-GN-F chips

Storage: Software RAID 0 of 2 Intel DC S3500 (Wolfsville) 800GB, SATA 6Gb/s, SSD 2.5", 7mm, MLC 20nm, SSDSC2BB800G401, firmware revision 0355

Add-on controllers: LOGISYS PC Remote Start/Reset Controller (RMPC2); 4-port (2 Ext + 2 Int) USB 3.0 STLab U-780, PCI-E x 1, NEC/Renesas µPD720201 chip

CPU: Noctua NH-U14S with Noctua NF-P14 FLX 140mm fan at 750 rpm (with the Ultra-Low-Noise Adaptor, ~7V); Noctua NT-H1 thermal compound
Rear exhaust case fan: Noctua NF-A14 ULN 140mm fan at 650 rpm (with the Low-Noise Adaptor, ~9V)

All other case fans removed

Case expansion slots: 3 x 2-port eSATA brackets; 4-port USB 3 bracket; 4-port USB 2 bracket

@@ Line 3: / Line 3: @@
 ;Motherboard
-:[http://www.supermicro.com/products/motherboard/xeon/c220/x10sae.cfm Supermicro MBD-X10SAE-O], Rev. 1.01, ATX, Intel C226, LGA 1150, [http://www.supermicro.com/QuickRefs/motherboard/C226/MNL-1479-QRG.pdf Quick Reference Guide], [http://www.supermicro.com/manuals/motherboard/C226/MNL-1479.pdf Manual], ''BIOS build date: 2013/8/13''
+:[http://www.supermicro.com/products/motherboard/xeon/c220/x10sae.cfm Supermicro MBD-X10SAE-O], Rev. 1.01, ATX, Intel C226, LGA 1150, [http://www.supermicro.com/QuickRefs/motherboard/C226/MNL-1479-QRG.pdf Quick Reference Guide], [http://www.supermicro.com/manuals/motherboard/C226/MNL-1479.pdf Manual], ''BIOS 1.1 build 2013/8/13''
 :;Built-in
 ::Intel HD graphics P4700